DT74 Timber Fencing Sections mould - OO Gauge
Timber Fencing Sections mould
This casting mould produces timber fence sections as seen in the photos, there are also corner posts and a spare straight post, so just cast as many as you need for you model scenery project.
Each fence panel is 26mm Wide x 24mm High
- Easy to cast
- Easy to extract
- Re-usable silicone mould
- Realistic Scenery and buildings
- Cast with Plaster or resin
- Easy to clean and store
Product Use
Model Railway casting mould. Cast these moulds with our Tuffcast casting powder or Herculite and even polyurethane Resin to make custom casts that can be used to make model railway buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.
Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue or superglue if using resin casted parts.
You can make a range of buildings, we suggest you lay out all the parts before gluing so you can see how your new building will look. We also have FREE building plans as well as tutorials online to help you get the most out of this amazing building medium.
Your models will look and feel like real stone and although they take longer to build than card models the finish is absolutely amazing