- Shop
- >
- OO Gauge
- >
- Buildings Moulds
- >
- British Heritage Range
- >
- BH02 British Heritage building Half Sections with Extension pillars - OO Scale
BH02 British Heritage building Half Sections with Extension pillars - OO Scale
British Heritage building Half Sections with Extension pillars
This casting mould is part of a new release in 2024 - Produces wall sections with windows and extension sections as well as end pillars.
these are the half sections and we also sell them in full sections if required (See BH01)
We are producing many more in this range, that provides the highest level of detail, please check out all our other products in the BH (British Historical) Premium Range series, to see all the amazing buildings that can be made.
We also provide many building ideas and plans online, if you are looking for some inspiration and remember you can build many more models using the parts as they will be compatible and interchangeable.
Cast Sizes W,H, D
- Main Part Top (2 Pillar Section) = 56mm x 40mm x 6mm
- Main Part Bottom (2 Pillar Section) 56mm x 32mm x 6mm
- Base sections 42.6mm wide x 32mm High
Please note, this is an OO Scale mould and we are now releasing these in N Scale and O Scale and you can use our colour coding to choose the scale you are looking for. Also check out our kits that offer better value if you looking to make lots of buildings
- Easy to cast
- Easy to extract
- Re-usable silicone mould
- Realistic Scenery and buildings
- Cast with Plaster or resin
- Easy to clean and store
Product Use
Please ensure you wash and dry your casting mould before use, to remove any packing residue. Our casting moulds are made of the highest quality silicone and are suitable for resin casting
Cast these moulds with Fastcast or slow cast resin to make custom casts that can be used to make model buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.
Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. If using resin mix equal parts of the resin liquid, stir and pour.
Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue if casting in plaster or superglue if using resin casted parts.
You can make a range of buildings, we suggest you lay out all the parts before gluing so you can see how your new building will look. We also have FREE building plans as well as tutorials online to help you get the most out of this amazing building medium.