British Heritage 4 mould FULL BUILDING kit - BH Kit3 - OO Scale
British Heritage 4 mould FULL Building kit
This casting mould kit is part of a new release in 2024 - Produces all the parts and sections to build the full model as shown, can also be used to create a variety of different models only limited by your imagination - by adding others in our range you can extend the possibilities.
- BH-EX03 - Side Sections (Short Height with Extension Bases)
- BH-R02 - Main Roofing Sections
- BH06 - Main front sections with apex and windows
- BH07 - Historical window section with apex top section
We are producing many more in this range, that provides the highest level of detail, please check out all our other products in the BH (British Historical) Premium Range series, to see all the amazing buildings that can be made.
We also provide many building ideas and plans online, if you are looking for some inspiration and remember you can build many more models using the parts as they will be compatible and interchangeable.
Cast Sizes W,H, D
- Main Sections = 49.2mm x 55.5mm
- Base Sections = 49.2mm x 22mm
- Main Roof Section 50mm x 118mm
- Main Beam 120mm Long
- Centre Beam 120mm Long
- Apex Sections = 50mm x 92.6mm x 6mm
- Arched window section 75mm x 60mm
- Apex Section = 50mm x 92.6mm x 6mm
Please note, this is an OO Scale Kit
- Easy to cast
- Easy to extract
- Re-usable silicone mould
- Realistic Scenery and buildings
- Cast with Plaster or resin
- Easy to clean and store
Please ensure you wash and dry your casting mould before use, to remove any packing residue. Our casting moulds are made of the highest quality silicone and are suitable for resin casting. For best results we recommend casting in resin and we also recommend using DWR plastics online.
Cast these moulds with Fastcast or slow cast resin to make custom casts that can be used to make model buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.
Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. If using resin mix equal parts of the resin liquid, stir and pour.
Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue if casting in plaster or superglue if using resin casted parts. You can make a range of buildings, we suggest you lay out all the parts before gluing so you can see how your new building will look. We also have FREE building plans as well as tutorials online to help you get the most out of this amazing building medium.